Nevertheless, for those who do not repair this subject – most frequently affecting the underside left registration mark – you may virtually at all times have print and cuts that aren’t aligned. Learn on for learn how to repair Silhouette registration marks that aren’t absolutely printing.
When your printer would not absolutely print the Silhouette print and reduce registration marks, the Silhouette CAMEO or Portrait cannot absolutely learn the mark. That outcomes is a registration error and/or a print and reduce that is misaligned.
To make sure your printer prints that backside left mark it is advisable to ensure that it is absolutely throughout the printable area. It is when it falls exterior that area that the mark is not absolutely printed.
There are normally two major causes the registration mark is exterior of the printable area:
- The web page setup measurement is unsuitable (above)
- You tried to create extra printable space and inadvertently moved the mark too low in making an attempt to create extra space
How you can Setup the Web page Dimension Appropriately for Print and Minimize
You may make positive the registration marks are all throughout the printable space by first ensuring your print web page settings and the Web page Setup media measurement are in sync.
From the Design space of Silhouette Studio go to File > Print Web page Setup.
You ALWAYS wish to do that step first. The printer web page settings might look barely totally different between a MAC and PC.
After you set the web page measurement out of your printer settings, return to Silhouette Studio and open the Web page Setup panel.
Change the Media Dimension to “Printer.” When you’ve got your printer settings right, choosing “Printer” will guarantee the 2 are synced.
Do NOT manually kind within the web page measurement and don’t choose any of the opposite picks.
If you have not already, from the Web page Setup panel nonetheless, examine the field for “Present Print Border”. This places a grey field within the work space that EVERYTHING you wish to print, together with the registration marks, wants to remain inside.
Activate the registration marks by clicking “M” or by going to the registration marks tab within the Web page Setup panel. Ensure you have the marks within the default place.
In case you DO not do step one after which go and choose your web page measurement in Silhouette Studio, you may see that the registration mark on the backside, falls under my print border (grey line) after I choose A4 because the web page measurement. This implies the mark will not absolutely print.
Choosing a Completely different Web page Dimension
In case you needed to print on A4 measurement paper (or some other web page measurement) then you will need to choose the A4 paper measurement in your printer settings first. Once more you’d nonetheless wish to choose “Printer” within the Silhouette Studio Web page setup although after going via the steps above.
If any of the marks usually are not printing you must be capable of clearly see why in Silhouette Studio by figuring out which marks are exterior of the print border.
In case you notice you may have a registration mark that is exterior of the protected print space, you may want to repair that by taking the above steps or you may transfer the marks. Learn to transfer the place of print and reduce registration marks in Silhouette Studio by following this tutorial.
Get Silhouette Faculty classes delivered to your e-mail inbox! Choose As soon as Each day or Weekly.