Ricoma MT-2001-8S upkeep could be very simple. Probably the most essential upkeep that must be accomplished is lubricating the rotary hook. Earlier than oiling or cleansing, we advise turning off your machine. To take care of and clear the rotary hook, start by eradicating the bobbin case from the rotary hook.

Clear any thread lint within the space utilizing a lint brush or dusting spray. 

Then add three or 4 drops of machine oil to the rotary hook.

Now you possibly can insert the bobbin case again into the rotary hook and shut the bobbin housing unit.

To ensure the machine runs effectively, repeat this course of twice a day if you’re planning to run a machine eight hours a day. 

A couple of times per week, take away the needle plate and clear across the trimmer knives with a tender brush.

As soon as per week, go a enterprise card or paper by means of the bobbin case slit to wash any lint buildup.

Each week, place a drop-off oil immediately on the needle bar by means of the slots within the needle case, alternate every week. 

One week lubricate the higher needle bar part and the subsequent week the decrease needle bar part.

As soon as per week oil the opening on the needle plate. For this part, we advise turning on the machine and setting it to needle one to see the opening on the precise aspect of the machine head. 

Add three drops of oil every week to that part.

Then, add three drops of oil to the steel rail of the machine head.

Now you possibly can transfer your machine head to needle 15 and place 2 drops of oil on the opposite aspect of the rail. 

As soon as every three to 5 months, apply white lithium grease to the black steel bar within the machine head. Additionally, apply this grease to the wheels positioned on the again of your machine head. 

As soon as every three to 5 months, apply white lithium grease to the colour change cam. 

You’ll first have to take away the steel plate positioned above the colour change cam by loosening the connected screw. Then apply grease to the colour change cam space. 

Place the quilt again over the colour change cam and tighten the screw earlier than continuing. 

At all times keep in mind, to not over oil. After oiling, sew on a take a look at swatch earlier than returning to manufacturing to guarantee further oil doesn’t stain clothes. 

These have been the easy steps for troubleshooting Ricoma MT-2001-8S embroidery machine and Ricoma MT-2001-8S upkeep. Now that you simply very properly know find out how to keep and resolve Ricoma MT-2001-8S issues & answer, it’s time to begin embroidering. Good luck!